IS introduces an improved straight slot which IS proved to be very effective in the rotation of problematic metals. Using an advanced chip, the interior lattice window can reach a diameter of 22 mm (0.866 inches).
In OD slot applications, n-type chips perform better than many other auto parts competitors: 56CrMo4, 65MnCr5 45MnVS6, 4535 and 4537.Some front-line suppliers reported that when feed prices were as low as 0.002, it began reliably separating the chips. From j-type to n-type chip, in 4340 steel structure, the output of a pinion gear is almost doubled, eliminating the chip processing problem completely.
The extended cutting line includes a double-ended GINI coefficient for ID rotations and grooves, and GIMN 3402 inserts for new dimensions for HG9037.
To meet the growing demand of the energy/powder industry, IS has launched a set of super-strength grooving tools for more efficient, safer T and L slot machines. The company reported that the tools had previously only been used as special deals and lighter designs. The key applications include the T slots on the turbine disc, the rotor and the outer shell made of super alloys.
Compared to any comparable standard or special standard, LPR insertion provides a very solid platform for selecting a chip that is suitable for use in long or short materials. For stronger grip, the tip is thick. This heavy design brings a certain degree of rigidity, improves the finished product, and improves the process safety of high value added components. By reducing the risk of a catastrophic tool fracture, and reliably extending the “cutting time”, the new I scar LPR insertion even allows no one to operate.
In order to carry out reliable chip evacuation in the groove and satisfy a wide range of market preferences, the advanced ground chip has produced an ideal long segment and separated it from the tightest groove. The pr type of chip deals with left and right cuts; Asymmetric T chips are cut only to the left. There is also a standard p-type chip for limited, less challenging operations, including short cutting metals. Additional chips can be supplied as required.
The width of IS LPGIRL/l insertion IS 2-5mm(0.079 “-.197”), which can handle the depth to 6.5 mm (.256).Match the HLPGRL/l tool to cover size to ensure that the system is rigid in all cases.