In extreme open-slot applications, insert itself is made up of solid sumo technology class HC8038.IS in broadband with 14 and 17 mm, with the width of the middle spiral clamping, insert it into a v-lock tool bracket and place it on a completely flat surface. The flat-top design ensures that no blocked chip flow, even at the bottom of the deep groove. It is recommended for the new type of iron -cw slot for carbon steel and high alloy steel, as well as the insertion of the original tiger for stainless steel.
IS continues to provide new solutions to difficult ID processing problems, through a strategic supplement to the hard alloy blades of its popular HKLLG family. Technology for the company’s latest innovation is ID three special problems: in the process of the bottom of the blind hole, into the high Angle drilling, reduce the number of matching tool between diameter and hole size does not match. The better the match between the tools and the hole geometry, the higher the efficiency of the operation. Ideally, the diameter and length should match.
In order to improve the flat level of the blind hole, the insertion feature of new Piko 050.20 is 20 degrees, from 8 degrees to 20 degrees. The increased clearance creates a larger space for eliminating chip interference, reducing the recutting of the chip. The inserts are in the diameter of 4.0 and 5.0mm in diameter, with a diameter of 2.0 mm and higher. For a high-specification hole with at least 6.8 millimeters in diameter, a new type of HKLLG 060 chamfer blade now has a 40mm handle that provides more than double the existing 19mm handle.
In addition, a new 6mm insertion has been added to make the size matching better in the range of 5 to 6.8 mm. The other three diameters also increase the tool selection of the HKLLG 050 series, whose diameter ranges from 0.5 to 4.0 mm. The new diameter is 0.8, 2.5 and 3.5 millimeters. All HKLLG 050 internal rotations and chamfering inserts have a number of long handles to optimize the size of the tool and hole.
All the IS HKLLG tools have a left and right style that can be used in IH900, the most versatile PVD coated hard alloy grade. The thin PVD coating protects the cut edge while retaining the ideal cut geometry on the substrate.