Carbide full profile thread milling cutter

EM-s threaded hard alloy wire mill is the most rigorous tolerance, providing the maximum tool performance and the quality of the parts. The complete profile design is the most stable form of thread milling, which can reduce the number of cycles compared to single point tools. Thread milling provides the highest level of thread safety, which is particularly important in high-value components, where breakage is a possible problem. GDF thread mill has wide selection, solid and coolant, providing maximum flexibility in the development of effective manufacturing processes. The GDF-Z and GDF- VARIO-ZD increase stiffness and stability in the cutting, increasing the flute and the higher core diameter. You are sure to find the tools for your application that are appropriate for your application.

characteristic

Production of internal and external threads – (UNC, UNF, M, MF)

Tools that use standard thread profiles for different threads of size (only one tone)

If needed, a ready threaded hole is required.

To avoid serious configuration bias in the internal threads, the cutter diameter should not exceed 2/3 (using thin lines, 3/4) threads.

Using external threads, the cutter diameter shall not exceed the diameter of the threaded threads.

Carbide full profile thread milling cutter

EM GHF carbide thread milling cutter is the most rigorous tolerance, providing the maximum tool performance and the quality of the parts. The complete profile design is the most stable form of thread milling, which can reduce the number of cycles compared to single point tools. Thread milling provides the highest level of thread safety, which is particularly important in high-value components, where breakage is a possible problem. GHF thread mill has wide selection, solid and coolant, and can maximize flexibility when developing efficient manufacturing processes.

EMG offers three factories for the non-proliferation of nuclear-weapon treaty threads:

GFI -eco pricing solutions

The GFI treaty on the non-proliferation of nuclear weapons

GFI – API LPH critical component manufacturing high-performance design

characteristic

Production for internal and external threads

For different thread sizes, standard thread profiles can be used (but only for one tone).

Pre-drilled threaded holes are necessary and need to be exfoliated if needed.

To avoid serious configuration bias in the internal threads, the cutter diameter should not exceed 2/3 (using thin lines, 3/4) threads.

Using external threads, the cutter diameter shall not exceed the diameter of the threaded threads.